M1 LED Hide Away

Don’t you hate the AMP draw your strobe power supply pulls from your battery? The Solution… LED HIDEAWAYS! Our M1 HAW's are designed to put out more light while reducing the AMP draw from your car battery. Each unit has eight 3W LEDs and an inline flasher with 19 flash patterns. Measuring 1 inch in diameter they are easy to install and come with 9 ft of cable. They are available in both solid and split colors and can be synced with up to 20 other units. Installation takes only a few minutes. Just wire to your existing switch box and your ready to go. All units come with a 5 year warranty.

Features:

EIGHT Three Watt LEDs per unit

19 Flash Patterns

Inline flasher

Split and Solid Alternating Flash Patterns

Mounts in a 1” hole

5 Year Warranty



WIRING OF THE LED HIDE-AWAY:

All LED HIDE-AWAY comes standard with 9’ of cable to wire from the front of a vehicle to the back.

RED: +V Connect to +V through an ON/OFF switch. The use of a fuse located close to the voltage source is recommended.

BLACK: - GROUND Connect to Ground vehicle chassis

YELLOW Connect all YELLOW wires for synchronization.

BLUE: Touch to ground for 1 second to scroll through patterns.

Flash Patterns: PA1. Quad Burst - Split PA2. Quad Burst - All PA3. Quad Burst – Alternating* PA4. Quad - Split PA5. Quad - All PA6. Quad – Alternating* PA7. Single - Split PA8. Single - All PA9. Single - Alternating* PA10. Super Flash - Split PA11. Super Flash - All PA12. Super Flash - Alternating* PA13. Quad/Single w/ Quad Burst - Split PA14. Quad/Single w/ Quad Burst PA15. Accelerator - Split PA16. Accelerator - All PA17. Express Flash PA18. California Steady with Pulse PA19. California Steady PA20. Steady All PA21. Cycle Flash – Split & All PA22. Off

*Light heads will alternate by placing even number heads on the alternating pattern and placing the odd number heads on the previous pattern.

We do not recommend placing split colored units on solid patterns. It will blur the colors together