M2 LED Hide Away

Don’t you hate the AMP draw your strobe power supply pulls from your battery? The Solution… LED HIDEAWAYS! Our LHA 9000 LED HIDE AWAYS are designed to put out more light while reducing the AMP draw from your car battery. Each unit has 9 3W LEDs and an inline flasher board with 19 flash patterns. Measuring 1 inch in diameter they are easy to install and come with 9 ft of cable. Installation takes only a few minutes. Just wire to your existing switch box and your ready to go. All units come with a 5 year warranty.

Features:

Three Watt LEDs

19 Flash Patterns

Inline flasher

Split and Solid Alternating Flash Patterns

Mounts in a 1” hole

5 Year Warranty



WIRING OF THE LED HIDE-AWAY:

All LED HIDE-AWAY comes standard with 9’ of cable to wire from the front of a vehicle to the back.

RED: +V Connect to +V through an ON/OFF switch. The use of a fuse located close to the voltage source is recommended.

BLACK: - GROUND Connect to Ground vehicle chassis

YELLOW: To select a flash pattern, touch YELLOW to +V or press pattern select switch to scroll through the flash patterns. The heads will remember the selected pattern even if power is removed. Apply for 5 seconds to reset to pattern “0”. Connect all YELLOW wires for synchronization.

WHITE: Alternating / Simultaneous

Connect all even numbered light heads to +V and they will alternate with all odd number light heads.



Flash Patterns:

0. Random, 1. Single (split), 2. Double (split), 3. Quad (split), 4. Quint (split), 5. Mega (split), 6. Ultra (split),

7. Single - Quad (split), 8. Single H/L (split), 9. Single (all), 10. Double (all), 11. Quad (all), 12. Quint (all), 1

3. Mega (all), 14. Ultra (all), 15. Single - Quad (all), 16. Single H/L (all), 17. Steady 2 (California), 18. Steady 4 (all),